| 1. |
24hours before installation, open the bamboo packing to enable the bamboo flooring more adaptable to temperature and humidity of the place to be installed onto, so that expansion after installation is effectively controlled. |
| 2. |
Apply one layer of asphaltum paper or other anti-humidity material onto the cement floor in order to conduct humidity-proof treatment( the joint overlapping of anti-humidity=5cm, upright along the wall edge=8cm). |
| 3. |
Cut one layer of 9~15mm veneers into 4 to 6 parts, and fix them into the floor with screws, with the gap between veneers at about 5mm(or use dry wood sticks by 50mm wide x 30mm thick instead of veneers, with center distance between two sticks at 450mm. Be sure not to seal two sides of wood sticks with cement.) |
| 4. |
Spread bamboo flooring, with a gap of 10mm at the joint between flooring and the wall. Don’t use aqueous glue(such as white glue paste) between flooring and veneers(or wood sticks). When installed in the area with humid climate, gaps should be left between floor and bamboo flooring. Under this situation, packing bags with about 0.5mm thick can be used as separating material, and be taken out after bamboo flooring are installed. |
| 5. |
Bamboo flooring can be fixed into veneers(or wood sticks) with air-nails or screws. |
| 6. |
Spread the bamboo flooring based on customer’s requirement to environment and furnishing design. Adjust properly to texture and color difference of bamboo material(for those natural bamboo flooring with color difference, if sedulous match is insisted, hiberarchy of bamboo flooring will be weakened, a feeling of back-to-nature will be lost completely.) |
| 7. |
Keep the bamboo flooring from water immerging and keep them dry while using. Keep air circulating to avoid the flooring from being wet and deformed. |
| 8. |
Avoid impact of sharp and heavy articles and frictions. Not contact with organic solvent and other corrosive chemicals. |
| ? |
Note: Please install strictly according to above-stated methods, otherwise deformation or other problems will occur. Our Company shall not be responsible for any loss resulted. |
